Hard As Nails Ext (Exterior)


Hard As Nails Ext (Exterior)


151 Hard As Nails Exterior (310ml)

High power adhesive.

Solvent free. No need for nails.

151 Hard as Nails Exterior is an instant grab, high strength adhesive. It has been specially formulated to withstand low temperatures so it can be used outside in colder weather. 151 Hard as Nails Exterior eliminates the need for nails and screws in many DIY jobs. It is ideal for fixed skirting boards, dado rails, architraves, plasterboard, plaster and polystyrene coving, carpet and grippers etc. to most building materials, as long as one surface is porous. This ultra high power adhesive is suitable for uneven surfaces because it fills minor gaps. 151 Hard As Nails Exterior is ideal as it dries white and can easily be painted when dry.

Directions for use:

1. Ensure surfaces are dry and free from dust, debris and grease. Dusty surfaces should be primed with 1 part PVA and 5 parts water and then left to dry.

2. Unscrew the nozzle and cut off the tip of the cartridge, leaving the threads intact. Refit the nozzle. Cut the tip of the nozzle at 45° to give the required diameter of sealant. Fit the cartridge into the cartridge gun by retracting the plunger and inserting the cartridge nozzle first into the front end of the gun. Squeeze the trigger until it holds the cartridge firmly without putting pressure onto the plunger.

3. Apply by squeezing the trigger. Keep the nozzle at a consistent 45° angle while applying. Apply one or two continuous beads to the back of the item and immediately press into place. For large items apply adhesive around perimeter approximately 50mm from edge and additional beads at 300mm intervals.

4. For heavy panels use support until adhesive has dried.

5. The adhesive dries in 24-48 hours in dry, warm conditions. In damp, cold or humid conditions, curing time may be significantly extended. When used externally, protect from rain until cured.

6. After use, store in a cool, dry place.

7. NOTE: The product, though water resistant to a degree, is not suitable where it will be in permanent or long term contact with water or damp.

8. NOTE: All data and recommendations given here are based on laboratory tests carried out with various building materials and experience gained when carrying out a variety of building work. However this should not be taken as a general warranty whether expressed or implied. The user must decide if the product is suitable for the intended application.

Barcode: 5050375010833


Pack Quantity12